What are the steps of installation of YoGPS Hardwired GPS Tracker?

Here are the steps for installing a GPS tracker in a car:

1. Determine the best location for the tracker. The tracker should be placed in a spot where it can easily receive a GPS signal, such as the dashboard or the center console. It should also be accessible for maintenance.
2. Choose a mounting method. You can use a mounting bracket or velcro strips to secure the tracker in place.
3. Identify the three wires on the GPS tracker. The wires are usually labeled according to their function, such as “power,” “ground,” and “ignition.”
4. Connect the power wire to a constant power source. This wire is typically red and provides power to the tracker even when the ignition is off. A good choice for this wire is a fuse in the car’s fuse box that is only powered when the car is running.
5. Connect the ground wire to a metal surface in the car. This wire is typically black or brown and provides a ground connection for the tracker. A good choice for this wire is a metal bolt or screw on the car’s frame.
6. Connect the ignition wire to the car’s ignition system. This wire is typically blue or green and provides power to the tracker only when the ignition is on. A good choice for this wire is a wire in the car’s wiring harness that is only powered when the ignition is on.
7. Test the connection. Once the wires are connected, turn the ignition on and off to ensure that the tracker is receiving power at the correct times. If the tracker is not functioning properly, check the connections to ensure that they are secure and correctly matched to the corresponding wires.
8. Test the tracker. After the tracker is set up, it’s a good idea to test its functionality to ensure that it is working properly. This may involve checking the GPS signal strength, verifying that the tracker is tracking your location accurately, and testing any alerts or notifications.

Please email support@yogps.com in case you need further assistance.